Table of Contents
Advertisement
Holding conference calls
This feature allows you to hold a three-way conversation between three extensions, or between two
extensions and CO line, or between two CO lines and an extension.
To hold an Internal Conference
·
When on a call, press the Scroll Down Key (î) until "Internal Conference" is displayed.
·
Select "Internal Conference".
·
Select the extension to be included in the conference.
·
When the extension answers, select "Conference" on the display.
To hold an External Conference
·
When on a call, press the Scroll Down Key (î) until "External Conference" is displayed.
·
Select "External Conference".
·
Select a free line and dial the external number.
·
When the call is answered, select "Conference" on the display.
Note: At the start of a conference call, a single tone is presented to all parties to indicate that the call is a
conference call.
Note: From a standard analog telephone, press Hookflash when on a call, place the second call and when it
is answered, dial Hookflash 3.
Using your digital telephone set with a headset
Your digital telephone set is equipped with a socket for a headset. When you plug the headset into the
socket, a prompt "Turn Headset On" is presented on the display.
Select "Turn Headset On". The phone is now programmed to operate with a headset.
"Turn Headset Off" is now displayed to allow you to revert to digital telephone set mode.
To make an internal or external call when using a headset
·
Press the Speaker Phone Key and dial your calls in the normal way.
To end a call when using headset
·
Press the Speaker Phone Key.
To answer a call when using a headset
·
Select the "Answer The Call" option on the display, or press the Speaker Phone Key.
Handset monitor
When you are on a call using the headset the handset receiver is also turned on.
If you wish to disable this facility unplug the handset when the headset is installed
33
Advertisement
Table of Contents
