Placing Conference Calls - Inter-Tel Axxess User Manual

P C
LACING ONFERENCE
With the Conference feature, you can establish a conference call with up to three
intercom and/or outside parties (four, including you).
To place a conference call:
While on the first call, press
1.
hold.
Place another intercom or outside call.
2.
Press
3.
repeat this step to place one more call on hold.)
Press
4.
calls together in the conference.
During the conference call, you can do the following:
•
To place the conference on hold: Press the
conference on hold without disconnecting the parties. To return to the conference,
press
•
To drop out of the conference: Press
phone from the conference, but leaves the other parties connected.
•
To add additional parties to the conference: Do the following:
a. Press the
nected.
b. Place a call to the party to be added to the conference.
c. EITHER, Press
OR, Press
and the new party are added to the conference.
•
To end the conference and place all parties on individual hold: Press
then press
speak to one party at a time by pressing
•
To mute your microphone: Press
your microphone on or off during the conference. If mute is enabled, you can
hear the conferenced parties, but they cannot hear you.
•
To transfer the conference to another extension or to voice mail: Press
the
TRANSFER CNF
hang up when you are ready to complete the transfer.
®
Axxess Executive Display Phone User Guide
C
ALLS
or the menu button to place the call on hold. (If necessary,
CNF
CNF
or the
CONNECT TO CONFERENCE
CNF
.
CNF
menu button. This leaves the conference parties con-
ADD PARTY
twice.
CNF
once, and then press
CNF
to place all of the parties on individual hold. You can then
HOLD
menu button and dial the desired extension number. Then
or the menu button to put the call on
CNF
CNF
menu button to join all of the
menu button. This places the
HOLD
and hang up. This removes your
CNF
CONNECT TO CONFERENCE
or a flashing button.
HOLD
or the
MUTE
MUTE
. You
and
CNF
menu button. This turns
or
TRANSFER
19