Outgoing Groups; To Program Lines Into Groups For Access Using The Codes 9 Or 760 - 769 - Inter-Tel encoreCX ECX 1000 Administrator's Manual

EncoreCX
Administrator's Manual

Outgoing Groups

To program lines into groups for access using the codes 9 or 760 - 769

"CO lines" can be grouped together in up to 11 Outgoing Groups. Each Outgoing Group is associated with
a code. These codes are 9 or 760 - 769, with Group 1 being associated with 9, etc. Dialing a code selects a
line from the associated Outgoing Group.
·
From the programming extension, press the PROGRAM Key.
·
Press the Scroll Down Key (î) until "System Programming" is displayed.
·
Select "System Programming".
·
Enter the System Programming Password and select "Lines".
·
Press the Scroll Down Key (î) until "Outgoing Groups" is displayed.
·
Select "Outgoing Groups".
Select the Group you wish to set up. Up to 11 Groups can be set up, each with a corresponding access
·
code - 9 or 760 - 769
Select the lines to be in the Group. The lines in the Group are indicated by a "¨".
·
Press the Speaker Phone Key to finish programming.
Note: Lines can be in one Outgoing Group only. Selecting a line to be a member of a Group automatically
removes it from all other Groups.
62