Using The Function Keys; Dss Extensions; Backlit Display - Inter-Tel encoreCX ECX 1000 Administrator's Manual

EncoreCX
Administrator's Manual

Using the Function Keys

There are four Function Keys located directly above the digital telephone set display. Particular features
are grouped under these keys, as follows:
HOLD
H
This key is used to place calls on hold. When calls are placed on hold using this key, a
prompt "Return To Line" is presented on the display.
This key accesses the options available to customize your digital telephone set settings.
It also accesses System Programming from the Programming extension only. (See page 53 for customizing
your digital telephone set and page 54 for System Programming access.)
This key accesses Voice Mail and Display Messaging features. (See page 71 for Voice
Mail and page 35 for Display Messaging.) To access Voice Mail, the system requires the Voice Mail
Module to be equipped.
This key allows you to program and dial numbers in the System and Personal Speed-Dial
lists, and also allows convenient dialing of the telephone number. (See page 36 for Speed-Dial lists.)

DSS extensions

Up to eight of the ECX 2000 digital telephone set extensions can be equipped with a DSS.
·
From the Programming extension, press the PROGRAM Key.
·
Press the Scroll Down Key (î) until "System Programming" is displayed.
·
Select "System Programming".
·
Enter the System Programming Password and select "extensions".
·
Press the Scroll Down Key (î) until "DSS Extensions" is shown.
·
Select "DSS Extensions".
·
Select those extensions which are to be equipped with a DSS.
Up to eight extensions may be selected.
A Power supply is used to provide the additional power needed for the additional 32 keys.

Backlit Display

The ECX 2000 digital telephone set can be backlit when it is being used. The additional AC adapter must
be used to backlight the display.
The ECX 1000W can also be backlit when it is being used. The additional AC adapter must be used to
backlight the display.
26