Placing Conference Calls - Inter-Tel AXXESS 550.8109 Manual

P C
LACING ONFERENCE
You can establish multi-party conference calls without operator assistance. You can
place any combination of up to three intercom or outside parties in the conference.
The Basics
— While on the first call, press
— Place another intercom or outside call. Place it on hold by pressing the flashing
CNF
— Press the flashing
Options
During the conference call you can do the following:
— Place the conference on hold: Press
(the parties are still connected). To return to the conference, press
— Drop out of the conference: Press
phone from the conference, but leaves the other parties connected.
— Add additional parties to the conference: Do the following:
•
Press
•
Place a call to the party to be added to the conference.
•
Press
— End the conference and place all parties on individual hold: Press
then press
speak to one party at a time by pressing
— Mute your microphone: Press
ing the conference. You can hear the conference parties, but they cannot hear you.
— Transfer the conference to another extension or to voice mail: Press
dial the desired extension number. Then hang up when you are ready to complete
the transfer.
AXXESS Standard and Basic Keyset and AXXESSORY Talk Guide
C
ALLS
CNF
. (If necessary, repeat this step to place one more call on hold.)
to join all of the calls together in the conference.
CNF
. This leaves the conference parties connected.
CNF
twice to put yourself and the new party into the conference.
CNF
to place all of the parties on individual hold. You can then
HOLD
MUTE
to put the call on hold.
. This places the conference on hold
HOLD
. Then hang up. This removes your
CNF
or a flashing key.
HOLD
. This turns your microphone on or off dur-
.
CNF
and
CNF
and
TRANSFER
15