Connecting Power To The Xhub Controllers; Figure 4-40 Connections Between Site Controller And Xhub Controller - Motorola DIMETRA MTS 2 Installation, Configuration And Basic Service Manual

Connecting Power to the XHUB Controllers

Figure 4-40 Connections Between Site Controller and XHUB Controller

Connecting Power to the XHUB Controllers
Along with the XHUB Controller, the concept of Redundant PSU power is introduced. The power from PSU
3/DC Out is split into two, supplying power to both XHUBs through the Power 3 connector. The power from
PSU 4/DC Out is also split into two, bringing power through the Power 4 connector on both XHUBs.
4-40
Chapter 4: Hardware Installation
6802800U74-N September 2009