MTS 2 and MTS 4 Installation, Configuration and Basic Service Manual
Procedure 4-9 How to Install the MTS LVD Kit (Continued)
3
6802800U74-N September 2009
4. Check that cables are secured properly and tighten the included cable tie retainers.
The cables shall not touch the metal housing.
Be very careful not to short circuit the battery poles.
Figure 4-32 MTS LVD Kit Battery Cable Connections
Note the small + and – signs on the side of the relay.
The pole with the –sign is recommended to be connected to the – pole on the battery.
Figure 4-33 MTS LVD Kit Plus and Minus Signs
MTS LVD Kit Installation
4-33