Receiver; Table 14-9 Receiver Specifications - Tetra - Motorola DIMETRA MTS 2 Installation, Configuration And Basic Service Manual

MTS 2 and MTS 4 Installation, Configuration and Basic Service Manual
Table 14-8 Transmit Specifications – TEDS (Continued)
Transmitter Specification
Tx Conducted Emission (25kHz TEDS)
Tx Conducted Emission (50kHz TEDS)
Intermodulation Attenuation
RF Input Impedance

Receiver

The receiver specifications are listed in
In Table 14-9
Table 14-9 Receiver Specifications – TETRA
Receiver Specification
Sensitivity (normal conditions, unprotected T1, static, 4% BER):
population mean:
spec limit:
Sensitivity (normal conditions, faded, TU50, 4% BER):
population mean :
spec limit:
Degradation (extreme conditions, static and faded)
Nominal Error Rate (unprotected T1):
Static, -85 to -40 dBm:
Static -40 to -20 dBm
TU50, -84 to -40 dBm
Maximum On-channel Desired Power Level
Co-channel Interference (19 dB C/I, faded, unprotected T1): TU50
Adjacent Channel Interference (faded, unprotected T1, normal conditions, 45
dB C/I (40 dB C/I for 800 MHz), at -103 dBm): TU50
Adjacent Channel Interference (faded, unprotected T1, extreme conditions, 35
dB C/I (30 dB C/I for 800 MHz)), at -97 dBm): TU50
6802800U74-N September 2009
and Table 14-10, all specifications are through the RF Distribution System, unless otherwise stated.
Value or Range
100 - 250 kHz
250 - 500 kHz
500 - 2500 kHz
2500 - frb kHz
>frb
112.5 - 262.5 kHz
262.5 - 500 kHz
500 - frb kHz
>frb
70 dB
50 Ω (nom.)
Table 14-9 and Table 14-10.
Receiver
-70 dBc
-80 dBc
-80 dBc
-90 dBc
-95 dBc
-70 dBc
-75 dBc
-80 dBc
-95 dBc
Value or Range
-120.0 dBm (-119.5
dBm 800 MHz)
-117.5 dBm
-113.5 dBm (-113.5
dBm 800 MHz)
-111.0 dBm
3 dB
<0.01%
<0.1%
<0.4%
-20 dBm
2.0%
2.0%
2.0%
14-9