Figure 4-8 Mts 2 - Drill Hole Position For The Mounting Plate - Motorola DIMETRA MTS 2 Installation, Configuration And Basic Service Manual

MTS 2 and MTS 4 Installation, Configuration and Basic Service Manual
Procedure 4-2 How to Mount a Mounting Plate
Ensure that the mounting plate has been correctly positioned in the equipment room, see
1
Figure 3-2
Use the mounting plate as drilling template or mark the floor according to the dimensions shown
2
in
plate. Four 12 mm holes are pre-drilled. Additional holes may be drilled in the mounting plate
where required.
Figure 4-8 MTS 2 – Drill Hole Position for the Mounting Plate
6802800U74-N September 2009
for MTS 2, Figure 3-4
Figure 4-8 and Figure 4-9. Remember to keep the 13 mm distance behind the mounting
for MTS 4, and Figure 3-6
Mounting a Mounting Plate
for Expansion Cabinet.
4-13