Motorola DIMETRA MTS 2 Installation, Configuration And Basic Service Manual page 405

MTS 2 and MTS 4 Installation, Configuration and Basic Service Manual
Table 13-7 Generic Base Radio Alarms (Continued)
Alarm ID
ALM_EX_DC_12V_FAULT
ALM_EX_DC_5V_FAULT
ALM_EX_DC_2_775V_FAULT
ALM_EX_DC_3_3V_FAULT
ALM_EX_DC_1_875V_FAULT
6802800U74-N September 2009
Recovery
Description
Action
Exciter DC 12V Transmitter is
line failure. disabled by
the software -
BRC is unable to
transmit.
Exciter DC 5V Transmitter is
line failure. disabled by
the software -
BRC is unable to
transmit.
Exciter DC Transmitter is
2.775V line disabled by
failure. the software -
BRC is unable to
transmit.
Exciter DC 3.3V Transmitter is
line failure. disabled by
the software -
BRC is unable to
transmit.
Exciter DC Transmitter is
1.875V line disabled by
failure. the software -
BRC is unable to
transmit.
Base Radio Alarms
Clear Action
If the alarm The alarm may be
condition reported because
disappears then of some power
transmitter is supply problems
re-enabled by the (cables, connectors)
software. or the BRC hardware
failure / configuration
problem.
If the alarm The alarm may be
condition reported because
disappears then of some power
transmitter is supply problems
re-enabled by the (cables, connectors)
software. or the BRC hardware
failure / configuration
problem.
If the alarm The alarm may be
condition reported because
disappears then of some power
transmitter is supply problems
re-enabled by the (cables, connectors)
software. or the BRC hardware
failure / configuration
problem.
If the alarm The alarm may be
condition reported because
disappears then of some power
transmitter is supply problems
re-enabled by the (cables, connectors)
software. or the BRC hardware
failure / configuration
problem.
If the alarm The alarm may be
condition reported because
disappears then of some power
transmitter is supply problems
re-enabled by the (cables, connectors)
software.
or the BRC hardware
failure / configuration
problem.
Notes
13-39