Service Cable And Connector Box Description; Table 6-1 Equipment For Cabinet Testing - Motorola DIMETRA MTS 2 Installation, Configuration And Basic Service Manual

Service Cable and Connector Box Description

Table 6-1 Equipment for Cabinet Testing

Equipment
Service Terminal
Service Connector Box
Basic Service Cable
Coaxial Directional
Coupler
Circulator, 360 MHz–
405 MHz
Circulator, 800 MHz–
900 MHz
Load
RF Attenuator, 10dB
RF Adapter
RF Adapter
RF Adapter
Rubidium Frequency
Standard
TETRA Signal Generator
TETRA Analyzer
(optional)
Miscellaneous Cabling
and Connectors
Service Cable and Connector Box Description
The Basic Service Cable (3066565B01) is used to connect the Service Terminal RS-232 port (DB9M)
to the Site Controller or Base Radio RJ45 Service Port to run the MMI commands.
The TESS MTS configuration application must be connected to the Site Controller using an Ethernet patch
cord between the Service Terminal network port and the Site Controller service port through a telnet session.
The Basic Service cable can be used with a DB9M to DB9M gender changer for the loading of infrastructure
keys (Ki) from a Key Variable Loader (KVL) into Site Controllers and Base Radios of encrypted MTSs.
6-4
Model/Type
0166502N05
3066565B01
3041-20
9C30-41
9C78
375 BNM
minimum 100 W
33 QMA-N-50- 1/133
NE
31 N-QMA- 1/1-- NE
33_716-N-50-1/---_UE Huber & Suhner
PRFS (or 2008)
Rhode & Schwarz:
SMU200A + SMX-K8
Agilent E4443A
Chapter 6: Configuration and Testing
Manufacturer Description
Locally Procured Used to access and interface with
Site Controller and BR MMI
Motorola Used for measuring receiver
sensitivity
Motorola
Narda Used for receive test signal
injection into duplex TX/RX
antenna port
Ferrocom
Ferrocom
Narda
Motorola Used to attenuate transmit signals
for testing
Huber & Suhner "N" female to "QMA" male
Huber & Suhner "N" female to "QMA" female
"N" female to DIN 7-16 male
Ball/Efratom Used as a frequency standard for
(UCT) receive test
Used for checking receive and
transmit operation
Used for checking receive and
transmit operation
Locally Procured Used to connect the signal
generator to the antenna ports
6802800U74-N September 2009