Connecting Cables - Motorola Avigilon 3 Series User Manual

Connecting Cables

Refer to the diagrams in the
following connections as required:
1. Connect a KVM switch or separate keyboard, mouse and monitor to the appliance.
The keyboard and mouse can be connected to any USB port on the appliance.
l
The monitor can be connected to any HDMI connector at the back of the appliance.
l
2. Connect the appliance to your network using an Ethernet cable.
3. Connect to power cords to the mains supply, or a UPS system if available.
4. To power on the 8-port Video Appliance: Connect the external power supply to the power connector
at the back of the appliance and use the supplied screwdriver to fasten it in place. Connect a power
cord to the external power supply. Press the switch on the power supply to power on the appliance.
5. To power on the 16-port or 24-port Video Appliance: Connect a power cable to the power supply at
the back of the appliance. The appliance immediately powers on.
6. Check that the appliance LED indicators display the correct status.
Connecting Cables
Overview on page 4 for the location of the different connectors. Make the
11