MTS 2 and MTS 4 Installation, Configuration and Basic Service Manual
Recommended Tools, Parts, and Test Equipment for
Installation
■
■
■
■
■
■
■
■
■
■
■
■
■
Table 4-9
through
required for the installation procedure. The model numbers listed are recommended, but equivalent
tools and equipment made by other manufacturers are acceptable.
Recommended Tools
Table 4-9 Recommended Tools for Installation
Tool
Electronics
Technician Tool
Kit
Sack trolley
Wrist strap
Torx30
screwdriver
Long shafted
Torx30
screwdriver
Torx20
screwdriver
Torx10
screwdriver
6802800U74-N September 2009
■
■
■
■
■
■
■
■
■
■
■
■
■
Table 4-11
list the tools, test equipment, and locally procured parts that are
When selecting tools and equipment, always choose those which
have insulated grips and handles. This helps prevent potential
injury resulting from electrical shock.
Model/Type
Recommended Tools, Parts, and Test Equipment for Installation
■
■
■
■
■
■
■
■
■
■
■
■
■
■
Supplier
Locally procured
Miscellaneous tools
Locally procured
Ensure that fork size is compatible with MTS
Locally procured
Ensure this is regularly tested
For mounting lifting brackets on MTS 4
Locally procured
For mounting Cavity Combiners in MTS 4 cabinet
Locally procured
For mounting toplids (front and rear) and RFDS
front cover in MTS 4
Locally procured
For mounting Base Radio, Site Controller, and
Power Supply Unit in the module cage
For mounting filters in module cage in MTS 2
For mounting filters to the filter bracket in MTS 2
For mounting filter bracket in the MTS 4 cabinet
For Hybrid Combiner
Locally procured
For fixing Fan Kit
■
■
■
■
■
■
Description
4-65