Motorola DIMETRA MTS 2 Installation, Configuration And Basic Service Manual page 302

MTS - Changing the Site Controller Configuration File
MTS - Changing the Site Controller Configuration File
Procedure 8-10 MTS - How to Change the Site Controller Configuration File
Connect PC to the maintenance port on the Site Controller.
1
Open saved configuration file. In TESS application select Personality menu, select Modify and
2
fill out the Site Title and Version boxes as applicable (optional).
Select Edit Serving Cell.
3
Select Security Tab and uncheck the following checkboxes:
4
Exit the Security Tab and serving cell windows.
5
Save the configuration.
6
Continue to
7
8-26
Procedure 8-10 does not apply to MTS running on System Release D6.1 and forward. Continue
to "MTS - Downloading the Site Controller Configuration" on page
Procedure 8-10 applies only to systems with security class 2 and 3.
• Air Interface Enabled
• Authentication Enabled
• Security Class 3 Supported
These settings will be populated by SwMi when the site is reset at a later stage.
"MTS - Downloading the Site Controller Configuration" on page
Chapter 8: Site Controller
8-27.
8-27.
6802800U74-N September 2009