Wall Fixing; Electrical Connections; Figure 4-11 Mts - Wall Fixing - Motorola DIMETRA MTS 2 Installation, Configuration And Basic Service Manual

Wall Fixing

Wall Fixing
The MTS 4 and Expansion Cabinet have the option of being fixed to a wall for extra stability. To do this, use
the two M6 holes in the back of either the MTS 4 cabinet or the Expansion Cabinet. See
Figure 4-11 MTS – Wall Fixing

Electrical Connections

■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
After the station equipment has been mechanically installed, electrical connections must be
made. This involves making the following connections to:
•
•
•
•
4-16
Use brackets and screws appropriate for the site wall properties.
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
Battery backup systems are not manufactured by Motorola. Consult the manufacturer's
instruction manual and other pertinent documentation for installing battery systems. Any
local regulations shall be adhered to when installing battery equipment.
The equipment cabinet is shipped with all cabling within the cabinet factory-installed. If necessary,
refer to Chapter 5, "Interconnection and Internal
Grounding Cables
Power Supply Cables
Antenna Cables
GPS Cables
◦
Remote GPS Receiver Cable
◦
Internal GPS Cable
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
Cabling", for cabling within the cabinet.
Chapter 4: Hardware Installation
Figure
■ ■ ■ ■
■
■
6802800U74-N September 2009
4-11.