Table 5-25: Rf Cabling/Connections For Expansion Cabinet With Two Tx Ant. And Up To Three Additional Rx - Motorola DIMETRA MTS 2 Installation, Configuration And Basic Service Manual

MTS 2 and MTS 4 Installation, Configuration and Basic Service Manual
Table 5-25 RF Cabling/Connections for Expansion Cabinet with Two TX ant. and Up to Three
Additional RX ant.
In-
Cable Part
dex
1 3066543B02
2 3066543B02
3 3066543B03
4 3066543B03
5
3066543B02
6 3066543B02
7
3066543B03
8 3066543B03
9 3066543B02
10 3066543B02
11 3066543B03
12 3066543B03
13 3066543B08
14 3066543B08
15 3066543B09
16 3066543B09
17 See
Table 5-17
18 3066543B16
19 3066543B11
20 3066543B11
21 3066543B11
6802800U74-N September 2009
From Unit
Number
Base Radio 5 / RX-S 1
Base Radio 6 / RX-S 1
Base Radio 7 / RX-S 1
Base Radio 8 / RX-S 1
Base Radio 5 / RX-S 2
Base Radio 6 / RX-S 2
Base Radio 7 / RX-S 2
Base Radio 8 / RX-S 2
Base Radio 5 / RX-S 3
Base Radio 6 / RX-S 3
Base Radio 7 / RX-S 3
Base Radio 8 / RX-S 3
Base Radio 5 / Tx
Base Radio 6 / Tx
Base Radio 7 / Tx
Base Radio 8 / Tx
ATCC 3 / TX Out
ATCC 4 / TX Out
ATCC (3, 4)
RX Splitter 1 / Prime
Cab
RX Splitter 2 / Prime
Cab
RX Splitter 3 / Prime
Cab
In the Prime Cabinet, the cables from ATCC 1/TX OUT to Post Filter 1/TX and from ATCC
2/TX to Post Filter 2/TX needs to be combined with a T Cable and connected to Post Filter
1/TX, allowing Expansion Cabinet channels to be connected to Post Filter 2/TX.
When MTCC is used instead of ATCC, connect the cables to corresponding inputs and outputs.
RX cables from Filters in Prime Cabinet to RX Splitters in the Expansion Cabinet
are routed through holes on the back side of the top-lid.
To Unit
RX-S 1 / BR 5 RX path / RX on 2 or 3 ant.
RX-S 1 / BR 6 RX path / RX on 2 or 3 ant.
RX-S 1 / BR 7 RX path / RX on 2 or 3 ant.
RX-S 1 / BR 8 RX path / RX on 2 or 3 ant.
RX-S 2 / BR 5 RX path / RX on 2 or 3 ant.
RX-S 2 / BR 6 RX path / RX on 2 or 3 ant.
RX-S 2 / BR 7 RX path / RX on 2 or 3 ant.
RX-S 2 / BR 8 RX path / RX on 2 or 3 ant.
RX-S 3 / BR 5 RX path / RX on 3 ant.
RX-S 3 / BR 6 RX path / RX on 3 ant.
RX-S 3 / BR 7 RX path / RX on 3 ant.
RX-S 3 / BR 8 RX path / RX on 3 ant.
ATCC 3 / TX A TX path, Coax cable, low loss
ATCC 3 / TX B TX path, Coax cable, low loss
ATCC 4 / TX A TX path, Coax cable, low loss
ATCC 4 / TX B TX path, Coax cable, low loss
ATCC (3, 4) TX path, Interconnect Harness
Post Filter 2 / TX TX path, Post Filter cable routed
in Prime Cabinet through conjunction hole at side of
the cabinet
Duplexer 1/ Exp RX path/ RX on 1 or 2 ant.
Cab (in MTS 4
Prime Cabinet)
Duplexer 2 / Exp RX path/ RX on 1 or 2 ant.
Cab (in MTS 4
Prime Cabinet)
Preselector / Exp RX path/ RX on 2 ant.
Cab (in MTS 4
Prime Cabinet)
RF Cabling
Notes
5-49