Motorola DIMETRA MTS 2 Installation, Configuration And Basic Service Manual page 399

MTS 2 and MTS 4 Installation, Configuration and Basic Service Manual
Table 13-7 Generic Base Radio Alarms (Continued)
Alarm ID
ALM_PLAT_NO_EXP_CB
ALM_PLAT_NO_GEN_CB
ALM_PLAT_NO_EVT_CB
ALM_PLAT_NO_RF_CB
ALM_TX_FINAL_FAILURE_FLT
ALM_TX_FINAL_FAILURE
ALM_TX_VSWR_ALARMING
6802800U74-N September 2009
Recovery
Description
Action
No CoreLib No recovery
action taken by
exception
callback the software.
set in BRC
Application
- internal
software error
No recovery
No CoreLib
action taken by
command
complete the software.
callback
set in BRC
Application
- internal
software error
No CoreLib No recovery
action taken by
event callback
set in BRC the software.
Application
- internal
software error
No CoreLib No recovery
action taken by
DSP receive
/ transmit the software.
data callback
set in BRC
Application
- internal
software error
Power Amplifier BRC is de-keyed
final failure. by the software.
Power Amplifier The output
final failure. power is reduced
by the software.
No recovery
Voltage Wave
action taken by
Standing Ratio
is high. the software.
Base Radio Alarms
Clear Action
The alarm will be Software error
cleared only after
resetting BRC.
The alarm will be Software error
cleared only after
resetting BRC.
The alarm will be Software error
cleared only after
resetting BRC.
The alarm will be Software error
cleared only after
resetting BRC.
If the alarm The alarm may be
condition reported because
disappears the of the BRC
alarm is cleared. hardware failure
or configuration
problems.
If the alarm The alarm may be
condition reported because
disappears then of the BRC
the output power hardware failure
is restored by the or configuration
software to the problems.
target level.
The alarm may be
reported because
of the BRC
hardware failure
or configuration
problems.
Notes
13-33