Recommended Test Equipment - Motorola DIMETRA MTS 2 Installation, Configuration And Basic Service Manual

Recommended Test Equipment

Table 4-9 Recommended Tools for Installation (Continued)
Tool
SW19 wrench
SW8, allen
wrench, HEX
Recommended Test Equipment
Table 4-10
shipment and must be procured locally. All model numbers are Motorola part numbers, unless noted otherwise.
Table 4-10
Test Equipment
Digital Multimeter
(only 1 required)
Time Domain
Reflectometer (TDR)
Ground Resistance
Ohmmeter
Service Computer
Service Connector Box
Basic Service Cable
(RS232)
TETRA Signal Generator
TETRA Analyzer
RF Attenuator, 250 W, 40
dB
RF Attenuator, 10 dB
RF Adapter
RF Adapter
RF Adapter
4-66
Model/Type
lists the recommended test equipment for installation. These are not included as part of the MTS
Recommended Test Equipment for Installation
Model/Type
Fluke 77
AEMC 3700 clamp-on
ground tester
p/n: 0166502N05
p/n: 3066565B01
Rhode & Schwarz:
SMU200A + SMX-K8
Agilent E4443A
Weinschel 404043
minimum 100 W
33 QMA-N-50-1/133 NE
31 N-QMA-50-1/1-- NE
33_716-N-50-1/---_UE
Supplier
Locally procured For adjusting the leveling feet on MTS 2/4
Locally procured For fixing the cabinet to the mounting plate
Supplier
Fluke
Locally
Procured
Locally
Procured
Locally
Procured
Motorola
Motorola
Motorola
Huber & Suhner
Huber & Suhner
Huber & Suhner
Chapter 4: Hardware Installation
Description
Description
AC/DC measurements.
Equivalent instrument is
acceptable
Possibly needed by Field
Installation Team
Possibly needed by Field
Installation Team
Local service terminal
Used for measuring receiver
sensitivity
For pinout information, see
"Site Controller - Front Panel
Connectors" in Chapter 8,
"Site Controller"
Used for checking receive and
transmit operation
Used for checking receive and
transmit operation
Protection for HP89441A
Protection for HP89441A
"N" female to "QMA" male
"N" female to "QMA" female
"N" female to DIN 7-16 male
6802800U74-N September 2009