MTS 2 and MTS 4 Installation, Configuration and Basic Service Manual
GPS Antenna Connection
The integrated GPS antenna connectors of N type, are placed on the junction panel, see
Figure 4-49
Figure 4-49 GPS Antenna Connection on MTS 2 Junction Panel
6802800U74-N September 2009
for MTS 2 and
Figure 4-50
Figure 4-49
and
Figure 4-50
There may be small differences in older configurations.
GPS Antenna must be protected by a grounded surge arrestor of the type that allows
DC to pass through. Please refer to
"Field Replaceable Units (FRUs)"
for MTS 4.
depicts the newer version of the MTS Junction Panel.
"Surge Arrestors and Suppliers"
for more information.
GPS Antenna Connection
in
Appendix A,
4-51