Transmitting Data (Usb Interfaces); Outputting Current Measurement Data; Transmitting Data (To A Pc); Connecting The Pc / Usb-B Interface (Usb Device) - wtw Multi 3410 Operating Manual

Operation
Installation of the USB
driver on the PC
78

4.10 Transmitting data (USB interfaces)

4.10.1 Outputting current measurement data

1 Output the current measurement data to the USB-B interface
with <PRT>.

4.10.2 Transmitting data (to a PC)

The meter has the following interfaces:
USB-B interface (USB Device)
e.g. to connect a PC
USB-A interface (USB Host),
e.g. to connect a USB flash drive
Via the USB-B interface (USB Device) you can transmit data to a PC or
printer and update the meter software.
Via the USB-A interface (USB Host) it is possible to transfer data to an
external USB memory device.

4.10.3 Connecting the PC / USB-B interface (USB Device)

Connect the Multi 3410 to the PC via the USB-B interface.
System requirements of the PC for installation of the USB driver:
PC with at least one free USB connection and CD-ROM drive
Windows 2000, XP, Vista.
1 Insert the supplied installation CD in the CD drive of your PC.
2 Install the driver from the CD.
Follow the Windows installation instructions as necessary.
3 Connect the Multi 3410 to the PC via the USB-B interface.
The meter is listed as a virtual COM interface among the con-
nections in the Windows instrument manager.
Multi 3410
ba75863e02 12/2009