Erasing Stored Measurement Datasets; Transmitting Data; Establishing The Connection To A Pc - wtw pHotoFlex STD Manual

Operation
?Prerequisites
48

4.6.5 Erasing stored measurement datasets

You can erase the stored measurement datasets altogether if you no longer
need them.
Erasing all measurement datasets is done in the menu, Configuration / Sys-
tem / Measured value memory / Delete.
Erasing individual datasets is not possible. If all memory locations are occu-
pied, however, it is possible to overwrite the oldest dataset at a time. A secu-
rity prompt appears before a dataset is overwritten.
4.7

Transmitting data

To transfer data from the pHotoFlex
connection to a PC or printer (see section 4.7.1).
With the PC software LS Data you can, without further configuration, transmit
or save measurement and calibration data for GLP-compliant data manage-
ment to LS Data or transmit them to Excel and thus to LIMS (see
section 4.7.2).
®
With the MultiLab Importer (an add-in for Microsoft Excel) you can transmit
data from the meter directly to an open Excel sheet (see section 4.7.3).
The connection to a printer or terminal program has to be configured so data
can be safely transmitted (see section 4.7.5).

4.7.1 Establishing the connection to a PC

You have the following possibilities of transmitting data from the
®
pHotoFlex STD to a PC
 via the RS232 interface of the pHotoFlex
or
 via the RS232 interface of the LabStation LS Flex/430
(accessories, see chapter 8)
 Microsoft Windows PC with one of the following operating systems:
– Windows 7
– Windows 8
– Windows 10.
 Free interface of the PC
– Serial COM interface
or
– USB interface:
and USB adapter (accessory)
®
STD to a PC or printer, first establish a
®
STD
®
pHotoFlex STD
ba75958e07 11/2020