Direct Connection With Windows Nt4; Windows Nt4 Computer Requirements; Establishing A Direct Connection - Teledyne CombiFlash Companion XL Installation Manual

Table of Contents

Advertisement

CombiFlash
Section 4 Direct Connection with
This section provides instructions for establishing
communications with the Companion XL from a computer
with Windows NT4 operating system.

4.1 Windows NT4 Computer Requirements

Minimum System Requirements:
• 266 MHz Pentium processor
• 32 MB RAM
• Ethernet Port
• TCP/IP services installed
• VGA or better graphics, minimum screen area of
800 × 600 pixels
• Microsoft Windows NT 4.0
• Microsoft Internet Explorer 5.5 or later
Note
The procedures described in this section will require a user
account on the PC with administrator privileges. If your user
account does not have administrator privileges, contact your IT
department before proceeding.

4.2 Establishing a Direct Connection

Sections 4.2.1 through 4.2.3 configure the computer so that it
can directly communicate with the Companion XL. After
completing the steps, the computer and Companion XL may be
operated as a stand-alone system, or the direct connection may
be used to configure the Companion XL so that it can be added
to a network (see Section 7).
®
Companion
Installation Guide
Windows NT4
®
XL
4-1

Advertisement

Table of Contents
loading

Table of Contents