Table of Contents
Advertisement
®
CombiFlash
Companion
Note
Some versions of the Windows operating system will require the
computer to be restarted before new ActiveX plug-ins can run. If
you are notified that the computer must be restarted, you may do
so now. After the computer restarts, complete steps 3 and 4 again
to reach the PeakTrak Main window.
The Companion XL and the computer are now configured as a
stand-alone system. Refer to PeakTrak's on-line help for
operating instructions. Abbreviated instructions can be found
in Section 8 of this guide.
If you want to add the Companion XL to the network, proceed
with Section 7 of this installation guide.
3-6
®
XL Installation Guide
Advertisement
Table of Contents
