Table of Contents
Advertisement
®
CombiFlash
Companion
5.2.1 Configure the Computer's Local Area Network
1. From the Windows Start button, select "Settings>Control
Panel" to view the control panels.
2. Locate the "Network and Dial-up Connections" icon and
open this control panel.
3. Highlight the "Local Area Connection" icon. View the
properties by right-clicking and selecting "Properties." The
Local Area Connection Properties Window will open
(Figure 5-1).
4. Highlight the "Internet Protocol (TCP/IP)" item in the list,
and click on the "Properties" button. The Internet Protocol
Properties Window will open (Figure 5-2).
Note
The following steps change the local area connection settings. If
the computer must be restored to its original network
configuration, record the present Internet Protocol (TCP/IP)
settings now.
5. Click the "Use the following IP address" option.
6. Enter the IP address "192.168.1.200".
Figure 5-1 Local Area Connection Properties Window
5-2
®
XL Installation Guide
Advertisement
Table of Contents
