Wire Feed Axis; Cold Wire Axis (Ice) - ESAB A2 Instruction Manual

8 CONFIGURATION MENU
The following options can be selected:
• A2TFJ1
A2 tractor automatic welding machine for Submerged Arc Welding (SAW)
• A2TGJ1
A2 tractor automatic welding machine for Gas-Shielded Metal Arc Welding (GMAW)
• A6TFF1
A6 tractor automatic welding machine for Submerged Arc Welding (SAW)
• MTW600
A6 tractor automatic welding machine for Submerged Arc Welding (SAW)
• FREE 2 AXIS
Optional configuration for connecting 2 motors to the actuator board. One for wire feed
and one for travel motion.
• FREE 3 AXIS
Optional configuration for connecting external roller beds, positioners or linear axis as
well as for 2 motors to the actuator board. One for wire feed and one for travel motion.
8.3.2

Wire feed axis

The wire feed motor is set automatically according to the tables below.
Motor
Gear 1
Gear 2
Diameter feed rollers 49 mm
Pulse sensor
Low manual speed
High manual speed
Motor
Gear 1
Gear 2
Diameter feed rollers
Pulse sensor
Low manual speed
High manual speed
8.3.3

Cold wire axis (ICE)

Motor
Gear 1
Gear 2
Diameter feed rollers
Pulse sensor
0460 949 274
A2TFJ1 A2TGJ1
5035 38 RPM 5035 68 RPM
49:1 49:1
1:1 1:1
49 mm
28 ppr 28 ppr
150 cm/min 150 cm/min
300 cm/min 300 cm/min
FREE 2 AXIS
VEC 4000
156:1
1:1
49 mm
32 ppr
150 cm/min
300 cm/min
FREE 2 AXIS
VEC 4000
156:1
1:1
49 mm
32 ppr
- 45 -
A6TFF1 MTW600
VEC4000 FHP258
156:1 24:1
1:1 1:1
49 mm 30 mm
32 ppr 28 ppr
150 cm/min 150 cm/min
300 cm/min 300 cm/min
FREE 3 AXIS
VEC 4000
156:1
1:1
49 mm
32 ppr
150 cm/min
300 cm/min
FREE 3 AXIS
VEC 4000
156:1
1:1
49 mm
32 ppr
© ESAB AB 2015