Product Code; Wire Feed Axis - ESAB PEK A2 Instruction Manual

GB
8.3.1

Product code

In the PRODUCT
CODE menu it is poss-
ible to select the auto-
matic welding machine,
column and boom,
roller bed or positioner
to be used.
When selecting product code, the correct motor type and gear ratio for the used
gearbox in the relevant product are selected automatically.
The following options can be selected:
S A2TFJ1
A2 tractor automatic welding machine for Submerged Arc Welding (SAW)
A2TGJ1
S
A2 tractor automatic welding machine for Gas−Shielded Metal Arc Welding
(GMAW)
A6TFF1
S
A6 tractor automatic welding machine for Submerged Arc Welding (SAW)
S FREE 2 AXIS
Optional configuration for connecting 2 motors to the actuator board. One for
wire feed and one for travel motion.
S FREE 3 AXIS
Optional configuration for connecting external roller beds, positioners or linear
axis as well as for 2 motors to the actuator board. One for wire feed and one for
travel motion.
8.3.2

Wire feed axis

The wire feed motor is set automatically according to the tables below.
Motor
Gear 1
Gear 2
Diameter feed rollers
Pulse sensor
Low manual speed
High manual speed
bi24d1ea
MACHINE CONFIGURATION
PRODUCT CODE
WIRE FEED AXIS"
TRAVEL AXIS"
TANDEM
A2TFJ1
5035 38 RPM
49:1
1:1
49 mm
28 ppr
150 cm/min
300 cm/min
− 37 −
A2TGJ1
5035 68 RPM
49:1
1:1
49 mm
28 ppr
150 cm/min
300 cm/min
A2TFX
OFF
QUIT
A6TFF1
VEC4000
156:1
1:1
49 mm
32 ppr
150 cm/min
300 cm/min