ALGE-Timing TDC8001 Manual page 9

Manual
TdC 8001
CARVING:
Program 9
Countdown of preset time until 0 and than upward running clock.
10-CHANNEL TIMER:
Program 10
Program 101 10-channel Timer 1:
Program with split timing for 10 channels. Each start number can have any number of stop impulses on
the same channel. Output of times on same scoreboard.
Program 102 10-channel Timer 2:
Program with split timing for 10 channels. Each start number can have any number of stop impulses on
same channel. Output of times on separate channels on separate scoreboards.
EQUESTRIAN SPORTS:
Program 11
Programs for show jumping events. Please ask your ALGE agent for a separate manual.
SPEED SKATING:
Program 12
Program for timing speed skating
CYCLING:
Program 13
Program 131 Cycling-Road
For road races to control the scoreboard (run time, time difference, average speed).
DOG SPORTS:
Program 14
Program 141 Challenge:
Program for Agility „Challenge". Please ask your ALGE agent for a separate manual.
TDC-TEST:
Program 15
Program for testing the TdC 8001
-9-