ALGE-Timing TDC8001 Manual page 66

Block finish times:
The finish time of each course can separately be blocked. If <BLOCK> of keypad (12) is pressed, the
finish time of the blue (left) course (c4) is printed invalid (time of day with ?). If <BLOCK> is pressed on
the finish keypad (8), the time of the red (right) course (c1) is printed invalid (time of day with ?). Pressing
<ALT> and <BLOCK> at the same time swallows the corresponding impulse.
Enter times:
<INPUT> has no function
Ranking: <CLASS> has no function
Course identification:
The courses can be identified with r (= red) and b (= blue) or r (= right) and L (= left). The selection for
the identification if the course is marked with b or L is executed in the main menu (menu 27: Idenfication
channel 4)
Photocells for finish:
− Red (right) course is connected to channel 1 (cable 001-10 in jack A')
Blue (left) course is connected to channel 4 (cable 001-10 in jack A)
−
Photocells for 1 intermediate time:
st
Red course on channel 2
−
− Blue course on channel 5
Photocells for 2 nd intermediate time:
Red course on channel 6
−
− Blue course on channel 7
Photocells for 3 rd intermediate time:
− Red course on channel 8
Blue course on channel 9
−
Channel assignment
c0 = start channel (= c3)
c1 = finish channel red
c2 = intermediate time 1 red
c3 = start channel (= c0)
Preset main menu:
Menu 1 delay time start
Menu 2 delay time finish
Menu 3: seconds mode
Menu 4: display time 1
Menu 5: display time 2
Menu 8: running time
Menu 9: running tenth
Menu 14: print start time
Menu 16: print linefeed
Menu 17: RS232 baud rate
Menu 18: RS232 run time
Menu 19: d-board baud rate
Menu 20: d-board channel 2
Menu 21: beep
Menu 24: change heat
Menu 25: change race
Menu 26: d-board test
Menu 27: ID channel 4
Menu 28: penalty time
Menu 53: bib-counting
Menu 55: LED-brightness
Menu 59: pulse from radio
Menu 60: startnumber-info RS232
Menu 62: extern beep
Menu 63: RS485 user
Manual
TdC 8001
c4 = finish channel blue
c5 = intermediate time 1 blue
c6 = intermediate time 2 red
c7 = intermediate time 2 blue
= 1.0 sec.
= 0.3 sec.
= off
= 3 sec.
= 3 sec.
= run
= off
= off
= 0
= 9600 baud
= off
= 2400 baud
= running
= on
= b (blue)
= 1.500 sec.
= manual
= 9
= all channels off
= off
= all channels off
= Wireless TN (WTN)
-66-
c8 = intermediate time 3 red
c9 = intermediate time 3 blue