Dual Timer, Program 6 - ALGE-Timing TDC8001 Manual

Table of Contents

Advertisement

6.4

Dual Timer, Program 6

Net timing with intermediate times on two courses with one competitor each on the course. The start
can be effected at the same time for both courses or separately. The evaluation can be carried out for
each course separately or jointly. Two heats are possible.
Activation procedure:
Turn on TdC 8001 (switch g)
select program DUAL TIMER (prog.no. 6) with  and , <ENTER>
clear storage for used race, <ENTER>
select race, <ENTER>
select precision, <ENTER>
<YES>, if groups are to be entered, otherwise <NO> and <ENTER>.
always input last number of group
confirm every input with <ENTER>
after the entering start number of last group, press <ENTER>
synchronize TdC 8001 (possibly with other ALGE timing devices)
press <F1> to confirm displayed day time
At next full minute a start impulse is output via channel c0.
TdC 8001 is ready for timing.
press <F2> if display (5) shows wrong time of day
enter time with finish keypad (8) and confirm with <ENTER>
start clock with start signal (<START> or channel c0)
Race procedure in 1
st
enter start number for blue (left) course with keypad (12) and confirm with <ENTER>
display (1) must show start number (and group) of blue (left) course.
Manual
TdC 8001
heat:
-70-

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TDC8001 and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents