Speed Skiing, Program 8 - ALGE-Timing TDC8001 Manual

6.6

Speed Skiing, Program 8

The program speed skiing measures time and speed for skiers who pass through two photocells with a
distance of 100 m. With speed skiing program only one heat can be carried out.
Measuring distance: 100 m (nonadjustable)
Channels: C0 start channel, C1 finish channel
Activation procedure:
turn on TdC 8001 (switch g)
−
select program 8 Speed Skiing with cursor keys and <ENTER>
−
clear memory for used race and <ENTER>
−
select race and <ENTER>
−
− <YES> for entering groups, otherwise <NO> and <ENTER>
when entering groups, always enter last number of a group
−
− confirm every input with <ENTER>
− after start number of last group is entered, press <ENTER>
synchronize TdC 8001 (possibly with other timing devices)
−
− press <F1> in order to confirm indicated time of day
at next full minute a start impulse is issued via channel c0
−
− TdC 8001 is ready for timing
press <F2> if display (5) shows wrong time of day
−
enter time with finish keypad (8) and confirm with <ENTER>
−
− start clock with start signal (<START> or channel c0)
Race procedure:
enter * and + on keypad (9), middle segment on display (1) is at the top
−
press <MENU> and <ALT> at the same time
−
select START in menu 12 (start number automatic)
−
− enter start number for start with start keypad (12) and <ENTER>
Manual
TdC 8001
speed: km/h (nonadjustable)
-77-