ALGE-Timing TDC8001 Manual page 31

4.3.2.4
Edit Run, Memory and Intermediate Times
In order to enter the edit menu for run, memory and intermediate times, press both <MENU> and <IN-
PUT> (of finish keypad 8).
Press both <MENU> and <INPUT>.
−
− The following shows on the info display (7):
Input times:
Continue: ENTER
− Select desired time with F1, F2, F3 or  and .
Execute the changes as described in the following three chapters.
−
Press both <MENU> and <INPUT> to leave the menu.
−
4.3.2.4.1
Change Run Time
You can edit the following:
− Overwriting the run time with finish keypad (12)
Copy run time to another start number
−
− Disqualify a competitor
Change run times:
− Press both <MENU> and <INPUT>
Press <F1> and then <ENTER>
−
− The info display show the current run time of the start number shown on finish display (6):
Input: 0015 RT
The cursor blinks at the last digit of the start number.
−
For editing another start number input it directly or select with  and .
−
When the correct start number shows, press <ENTER> (finish keypad 8).
−
− If this start number already has several times, the info display (7) shows as follows:
Input: 0015 LZ
You can overwrite the time with the number keys of keypad (8) (manual input of run time).
−
− If you want to assign the marked run time also to another start number, press <F1> and input
the new start number.
− You can disqualify a competitor with <F2>; start, finish and run time of the disqualified competitor
are invalidated.
− Leave the menu by pressing both <MENU> and <INPUT> on finish keypad (8).
Attention: A run time of 00:00:00.00 means that no finish time has been assigned to this start number
yet. An overwritten run time is marked with c, e. g. c0009 LZ 00:01:35.139
Manual
TdC 8001
RUN TIME< F1
MEMORY TIME
INTERMEDIATE TIME
00:01:35.139
00:01:35.139
change the run time
F2 change the memory time
F3 change intermediate time
F1 e. g. start number 15
NEW No
F2
DISQU.
NEW No F1 The currently valid time can be
F2 overwritten.
DISQU.
-31-