ALGE-Timing TDC8001 Manual page 73

Printer: example of printout
0001 b ST 10:05:58.9901
FT 10:07:20.2342
RT
0002 r ST 10:07:01.4855
FT 10:08:22.3856
RT
0001 l ST 10:05:58.9907
FT 10:07:20.2347
RT
Display Board (D-LINE and GAZ)
Net time and start number/rank can be shown on a
ALGE display board. Always the current number of
display (6) is shown (on display board this number
is only 3-digit, rank only 2-digit).
For each course a separate display board is re-
quired. For the red 8right) course the code switch
must be set to 1, for the blue (left) course to 2.
channel 2 can be activated in main menu (see
menu 20). If working with channel 2 only the
stopped time is shown on the display board (no run-
ning time).
RS232 Interface: see chapter 8.2
Manual
TdC 8001
start time blue course
finish time blue course
run time blue course
1:21.24
start time red course
finish time red course
1:20.90 run time red course
start time left course
finish time left course
run time left course
1:21.24
-73-