Race Points; Print - Turn Printer On Or Off - ALGE-Timing TDC8001 Manual

4.5.3

Race Points

For the ranking of SPLIT the race points for alpine or Nordic skiing can be calculated. Race point for
alpine skiing can only be calculated if the run time is more than 30 seconds.
Classement: NO RACE POINTS
RACE POINTS BEST TIME
RACE POINTS START NUMBER
Continue: ENTER
<F2> selects race point calculation; race points based on best time are calculated
−
<F3> selects race point calculation; race points based on times of start numbers is calculated
−
Classement:
Save with: ENTER
− In order to calculate race points for groups or classes, first the fastest time has to be entered.
Every discipline has a certain F factor that has to be input:
−
Classement:
Continue: ENTER
The printout with race point calculation for an alpine skiing race looks like this:
1.
0003 RT 1:49.52
RP 00000.00
2.
0011 RT 1:49.69
RP 00012.34
3.
0017 RT 1:50.69
RP 00032.34
4.6 Print – Turn Printer On or Off
The printer is automatically activated during activation process of the TdC 8001. After turning on the
following setting for the printer are available with <PRINT>:
Print mode:
Buffer mode:
− Press <PRINT>
− Printer in buffer mode, i. e. all printer data is saved
Press <PRINT>
−
− Printer in print mode, the data saved in the meantime is now printed.
Turn printer off:
− Press <ALT> and <PRINT>
Printer is off
−
− Press <PRINT>
Printer is on, all newly received data is printed
−
Manual
TdC 8001
F1
<
F2
F3
No: 0
F-Factor: _
1 rank
st
start number 3 and run time
race points for StNo 3
2 rank
nd
start number 11 and run time
race points for StNo 11
3 rank
rd
start number 17 and run time
race points for StNo 17
all printer data is printed
all printer data is saved but not printed. Use this during paper replacement.
Printer is off, sent data is lost
-39-