ALGE-Timing TDC8001 Manual page 43

Intermediate Time Rank
Display (5) and scoreboard can show the rank for every intermediate time. The rank is always displayed
for the period of "display time". For using several intermediate times, every one of it must have its own
channel (C2 to C9).
Menu 10: INTERMEDIATE RANK
Save with: ENTER
Run Time Rank
Display (5) and scoreboard can show the rank for every run or total time. The rank is always displayed
for the period of "display time".
Menu 11: RUN TIME RANK
Save with: ENTER
Start Number Automatic
The start number input for start and finish can be executed automatically
− START: Only one competitor is allowed on the track. If the competitor has reached the finish,
the next one can start. As long as the start numbers are counted up continuously, no start num-
ber has to be entered for neither start nor finish.
FINISH: It is irrelevant how many competitors are on the track. The start number in start display
−
(1) steps forward by one start number after every start impulse. The start number in finish display
(6) steps forward by one start number after every finish impulse
Menu 12: STNO AUTOMATIC
Save with: ENTER
Automatic Time
If the start number automatic is on finish, an automatic time can be set. If a competitor does not reach
the finish before the end of the automatic time, the finish display automatically switches to the next
started number.
Menu 13: AUTOMATIC TIME = 00:00:00.00
Save with: ENTER
Print Start Time
The start time can be printed right after the start. Typically, the start time is printed with finish and run
time.
Menu 14: PRINT START TIME
Save with: ENTER
Print Menus
Starting with version V11.31 we do not have this menu any more. By pressing <MENU> and <PRINT>
it is now possible to print the menu list.
Before version V11.31 menu 15 had the following functions. The menus are normally also printed (e. g.
when turning on). This does not happen when "Print Menus" is off. The changes of settings in the main
menu are neither printed.
Menu 15: PRINT MENU
Save with: ENTER
Manual
TdC 8001
Menu 10
ON<
OFF
Menu 11
ON<
OFF
Menu 12
START<
FINISH
OFF
Menu 13
Menu 14
ON<
OFF
Menu 15
ON<
OFF
-43-
Default = OFF
F1 show rank
F2 do not show rank
confirm selection with <ENTER>
Default = ON
F1 show rank
F2 do not show rank
confirm selection with <ENTER>
Default = OFF
F1 start automatic activated
F2 finish automatic activated
F3 automatic deactivated
confirm selection with <ENTER>
Default = 00:00:00.00
confirm with <ENTER>
Default = AUS
F1 print start time immediately
F2 print start time with finish time
confirm selection with <ENTER>
Default = ON
F1 print menu settings
F2 do not print menu settings
confirm selection with <ENTER>