ALGE-Timing TDC8001 Manual page 48

Penalty Points
Penalty points are imposed at show jumping. The standard penalty points for obstacle knockdown can
be selected. Penalty Points from 0.01 to 99.99 are possible.
Menu 36: PENALTY POINTS = 04.00
Save with: ENTER
Time Violation 1
Time violation points incur at show jumping. The points per started second time violation for the main
course can be set between 00.00 and 99.99.
Menu 37: TIME VIOLATION = 00.25
Save with: ENTER
Time Violation 2
Time violation points incur at show jumping. The points per started second time violation for jump-off
course can be set between 0.00 and 99.99.
Menu 38: TIME VIOLATION= 01.00
Save with: ENTER
Parcour Time 1
Parcour (course) time has to be entered for show jumping. If you do not input any parcour time no
penalty points are added for time violation. The parcour time 1 applies to the main course (1
Menu 39: PARCOUR TIME 1 = 000.00
Save with: ENTER
Parcour Time 2
See "Parcour Time 1". Parcour time 2 applies to 2
Menu 40: PARCOUR TIME 2 = 000.00
Save with: ENTER
Block Time 1
Enter block time for show jumping. During the block time a finish impulse of the finish photocell is eval-
uated as invalid. The time of day is printed with a question mark. The time stops neither on display (5)
neither on the display board. Block time is for competition during which the rider passes the finish pho-
tocell before passing the finish. Block time 1 applies to main course (1
Menu 41: BLOCK TIME 1 = 000.00
Save with: ENTER
Block Time 2
See "Block Time 1". Block time 2 applies to 2
Menu 42: BLOCK TIME 2 = 000.00
Save with: ENTER
Manual
TdC 8001
Menu 36
Menu 37
Menu 38
Menu 39
Menu 40
phase.
nd
Menu 41
Menu 42
phase.
nd
-48-
Default = 04.00
pre-set penalty points
exit with <ENTER>
Default = 0.25
pre-set time points
exit with <ENTER>
Default = 1.00
pre-set time points
exit with <ENTER>
Default = 000.00
enter course time
exit with <ENTER>
Default = 000.00
enter course time
exit with <ENTER>
Default = 000.00
phase).
st
block time
exit with <ENTER>
Default = 000.00
preset time points
exit with <ENTER>
phase).
st