ALGE-Timing TDC8001 Manual page 37

− Enter start numbers that you want to have in the ranking, e. g. 12 <ENTER>, 24 <ENTER>, 134
<ENTER>, 53 <ENTER>
The info display (7) shows:
−
Classement:
Save with: ENTER
When all start number are input, press <ENTER>.
−
− Select if the output of the ranking is with or without race points
A ranking of start numbers 12, 24, 53 and 134 is printed
−
− The same ranking is output via RS232 interface
First Ten: A ranking of the first 10 ranks is issued.
Classement:
RUN TIME
FIRST TEN
1.
0009 RT 1:30.45
2.
0014 RT 1:30.56
etc.
9.
0002 RT 1:31.69
10.
0020 RT 1:31.99
Not Finished: All start numbers are printed that have a start time but no finish time
Classement:
RUN TIME
NOT FINISHED
0004
0028
0052
0109
Add: Adding any number of times is possible. The added time is used to issue a team ranking.
Classement:
Continue: ENTER
Enter start numbers that you want in the ranking, e. g. 9 <ENTER> 14 <ENTER> 72 <ENTER>
−
102 <ENTER>
The info display (7) shows:
−
Classement:
Continue: ENTER
When all start numbers are entered, press <ENTER>
−
− The times of start numbers 9, 14, 72 and 102 are printed.
− The times are added and printed.
Manual
TdC 8001
No: 12
No: 24
No: 134
No: 53
No: _
No: 9
No: 14
No: 72
No: 102
-37-