ALGE-Timing TDC8001 Manual page 29

4.3.1.4
Enter Start Times (Start Intervals)
For many sports the start times are already determined before the race, i. e. you can enter the start
times in advance. Press both <MENU> and <INPUT> to go to the menu for entering the start times.
If the competitors start in regular intervals or at the same time, the start times can easily be entered:
Press both <MENU> and <INPUT>.
−
The following appears on info display (7):
−
Start interval from no:
Continue: ENTER
− Enter first and last start number for times with the same interval.
Enter start time for the first start number.
−
Enter interval time (interval from start number to start number). If interval time is 00:00:00.000
−
it is a mass start for all entered start numbers.
Attention: If the start times are input before the start and the start is delayed you have to enter the start
times again. If the same start numbers are entered in different groups, always the latest input is valid.
For example: input of start numbers 1 to 10, start time 10:00 hrs, interval time one minute
Start interval from no:
Continue: ENTER
This results in the following start times
start number 1 – 10:00 hrs
−
start number 2 – 10:01 hrs
−
− etc.
start number 10 – 10:09 hrs
−
Attention: If the competitors start with irregular intervals, enter the data with <INPUT> of the start keypad
(12) (e. g. Nordic Combined – Gunderson method).
Manual
TdC 8001
001 to no: 002
Start time: 10:00:00.000
Interval: 00:01:00.000
001 to no: 010
Start time: 10:00:00.000
Interval: 00:01:00.000
-29-