Basic Product Specifications - Fujitsu IMAGE SCANNER FI-4860C Operator's Manual

9.1 Basic Product Specifications

Scanner Type
1
Image sensor
2
Light source
3
Scanning area
4
Document thickness
5
Scanning speed
6
(A4 Portrait) * 2
ADF capacity
7
Optical resolution
8
Output resolution Binary (Black
9
Grayscale level
10
Output mode of halftone patterns
11
Interface
12
Other functions
13
(* 1) For details, see "Chapter 8 ADF and Document Specifications"
(* 2) The scanning speed is the maximum speed of the scanner hardware. The actual speed may
be slower due to the system overhead such as data transfer time.
(* 3) With JPEG enabled
(* 4) The maximum capacity varies depending on the document thickness. Refer to
"Chapter 6 ADF DOCUMENT SPECIFICATIONS."
(* 5) Avoid connecting other SCSI devices to the same bus.
It can reduces the scaner throughput.
236
9.1 Basic Product Specifications
ADF(Automatic Document Feeder)
and Manual feed
Color CCD x 2
White cold cathode discharge
lamp x 2
Minimum 74mm×74mm
Maximum A3 or 11x17 in.
52g/m
Binary (Black Simplex 60 ppm
and White)
Duplex 120 ipm
Color Simplex 60 ppm
Duplex 120 ipm
500 sheets
400 dpi
100, 150, 200, 240, 300, 400 dpi
and White)
Grayscale 100, 150, 200, 240, 300, 400 dpi
Color 100, 150, 200, 300, 400 dpi
8 bits per color
Dither/Error diffusion
Ultra Wide SCSI
JPEG compression
2 2
to 127g/m
-
Front/Back
Front/Back
-
-
(* 1)
200dpi
150 dpi (* 3)
200 dpi
2
80g/m
-
-
-
-
internal 10
bits
-
Shielded, 68
pin half
density (Mini
DB68)
-