Fujitsu IMAGE SCANNER FI-4860C Operator's Manual page 210

10. Setting Short document scan mode(Paper Length setup)
1) Press (Next button) or
2) At <Screen10>, press
the proper setting for the document to scan.
HINT
(1) [Normal] is blinking:
(2) [ Short] is blinking:
(3) Press (Enter button) and make the setting valid.
Press (EXIT button) at the end and the LCD display goes back to [Ready]
screen.
(Previous button) and let LCD display <Screen10> .
<Screen10>
! 1 0 P a
= N o r m
(Left arrow button) or
The blinking item is the one selected.
This mode is for scanning documents longer than
80mm.
This mode is for scanning documents which length is
80mm or less.
p e r L e n
a l / S h o r
(Right arrow button) and select
7.3 Setup Mode Details
g t h
t
7
187