Fujitsu IMAGE SCANNER FI-4860C Operator's Manual page 249

(4) At <Screen51-2>, select the right most item, [200] in the sample screen, and press
(Enter button). Then the LCD display shows <Screen51-2.4>.
and select scan resolution. Following parameters can be specified.
200:
240:
300:
400 sheets:
Press
redisplayed.
(5) Press
At <Screen51-1>, select [START] and press
If fi-486PRFR and/or fi-486PRREis installed, <Screen51-3> is displayed for you to
setup imprinter test conditions.
If an imprinter(s) is not installed, the scanner starts scanning operations.
226
7.5 Test Mode Details
<Screen51-2.4>
R
At this screen, press
Scan at 200 dpi
Scan at 240 dpi
Scan at 300 dpi
Scan at 400 dpi
(Enter button) and confirm the setting. Then <Screen51-2> is
(Enter button). Then <Screen51-1> is redisplayed.
<Screen51-3>
= O f
E S O L U T I
0
2 0
(Left arrow button) or
(Start button).
P r i n t
f / O n : P r
O N
(Right arrow button)
e / P o s t