Basic Product Specifications - Fujitsu FI-4860C2 Operator's Manual

9.1 Basic Product Specifications

1 Scanner Type
2 Image sensor
3 Light source
4 Scanning area
5 Document thickness
6 Scanning speed
(A4 Portrait/Letter
Portrait)
(* 2)
7 ADF capacity (* 4)
8 Optical resolution
9 Output resolution
10 Grayscale level
11 Output mode of halftone patterns
12 Interface (* 6)
13 Other functions
(* 1) For details, refer to "Chapter 6 ADF DOCUMENT SPECIFICATIONS" on page 6-1.
(* 2) The scanning speed is the maximum speed of the scanner hardware. The actual speed may be
slower due to the system overhead such as data transfer time.
(* 3 )With JPEG enabled
(* 4) The maximum capacity varies depending on the document thickness. Refer to "Chapter 6 ADF
DOCUMENT SPECIFICATIONS" on page 6-1.
(* 5) A3 and 11 x17in document sizes are not supported at color 400dpi.
(* 6) Avoid connecting other SCSI devices to the same bus.
It can reduces the scaner throughput.
9-2
9.1 Basic Product Specifications
ADF(Automatic Document Feeder)
and Manual feed
Color CCD x 2
White fluorescent lamp x 2
Minimum 74 mm x 74 mm, 2.9 in. x 2.9 in.
Maximum A3 or 11x17 in.
52 g/m
Binary (Black and Simplex 60 ppm
White)
Duplex 120 ipm
Grayscale Simplex 60 ppm
Duplex 120 ipm
Color Simplex 60 ppm
Duplex 120 ipm
500 sheets
400 dpi
Binary (Black and 100, 150, 200, 240, 300, 400 dpi
White)
Grayscale 100, 150, 200, 240, 300, 400 dpi
Color 100, 150, 200, 300, 400 dpi
8 bits
Dither/Error diffusion
Ultra Wide SCSI
JPEG compression
2 2
to 127 g/m or 14 lb to 34 lb
-
Front/Back
Front/Back
-
-
(* 1)
200dpi
200dpi
150 dpi (* 3)
200 dpi (* 3)
2
A4 80 g/m , or
Letter 20 lb
-
-
-
(* 5)-
10 bits
internal
-
Shielded, 68
pin half density
(High Density
DB68)
-