Fujitsu IMAGE SCANNER FI-4860C Operator's Manual page 232

2) At <Screen26>, to choose to reset the ink counter, press
select [Reset].
Press (Enter button). <Screen26-1> is displayed.
Not to reset, select [No] and press
3) At <Screen26-1>, to actually reset the counter, press
select [yes].
To cancel the reset, select [No] and press
4) Press (Enter button) and reset the counter.
The remaining ink amount indication on LCD goes back to full (
5) Press (EXIT button) at <Screen26-1> then the LCD display changes to
<Screen26>.
Press (EXIT button) at <Screen1> and the LCD display goes back to [Ready]
screen.
(Enter button).
<Screen26-1>
! 2 6 - 1
! n
2 6 I
=
(Left arrow button) and
t
R e s e N
N o / Y e
(Right arrow button) and
(Enter button).
x x )
k ( x x
R e s e t
7.3 Setup Mode Details
o w
7
s
).
/ N o
209