Basic Product Specification - Fujitsu fi-4750C Operator's Manual

Basic Product Specification

o
Item
N .
1 Operating method
2 Image sensor
3 Light source
4 Document
Minimum
Size
Maximum
5 Document Thickness
6 Optical Resolution
7 Output Binary
Grayscale
Resolution
Color
8 Grayscale level (internal)
9 Scanning
Speed
(mechanical)
Simplex
Note *2
Duplex
10 Halftone patterns
11 Capacity of ADF
12 Compression
13 Interface
Note *6
Notes*1: The details are described in chapter 4.
*2: The actual scanning speed might differ due to host computers' environment.
*3: These data do not contian processing time of the host computer.
*4: The maximum number will differ due to the paper thickness. Refer to chapter 4.
*5: The scanning speed might be slow. The usage with NO COMPRESSION is recommended.
*6: Both SCSI-2 and the Third Party Slot can not be used at the same time.
*7: The Power consumption of the boards should be as follows:
- In the Low Power Mode:
- With IPC-4D option:
- Without IPC-4D option:
Specification
ADF (Duplex), Flatbed
CCD x 2
LED Lamp x 2
A8 (Portrait)
A3/11x17in.
2 2
52 g/m (14 lb) to 127 g/m
400 dpi
100/150/200/240/300/400/600/800 dpi
100/150/200/240/300/400/600 dpi
100/150/200/240/300/400/600 dpi
1024 levels (10 bits)
White binary 50ppm, 200dpi, A4, Portrait
35ppm, 300dpi, A4, Portrait
64ppm, 200dpi, A4, Landscape
Unicolor binary
36ppm, 200dpi, A4, Portrait
Color
16ppm, 200dpi, A4, Portrait
White binary
90ipm, 200dpi, A4, Portrait
62ipm, 300dpi, A4, Portrait
114ipm, 200dpi, A4, Landscape
Unicolor binary
64ipm, 200dpi, A4, Portrait
Color
24ipm, 200dpi, A4, Portrait
Dither/Error diffusion
100 sheets (A4, 64 g/m 2 (17 lb))
MH/MR/MMR
SCSI-2
Third Party Slot
Less than 0.35 A
Less than 1.5 A
Less than 3.0 A
Front/Back
Green, Red, Blue
(34 lb) Note *1
Note *3
Note *4
Note *5
High Density (Half)
50-pin, Female
Note *7
Remarks