Fujitsu IMAGE SCANNER FI-4860C Operator's Manual page 244
Duplex color scanner
Hide thumbs
Also See for IMAGE SCANNER FI-4860C:
- Operator's manual (321 pages) ,
- Installation manual (88 pages) ,
- Consumable replacement and cleaning instructions (30 pages)
Table of Contents
Advertisement
Press
(Enter button) and confirm the setting.Then the display goes back to
<Screen50-2>.
(3) At <Screen50-2>, select the third item from left, [BW] in the sample screen, and
press
(Enter button). Then the LCD display shows <Screen50-2.3>.
In this screen, press
the scan mode: binary (BW) or color(COLOR).
Press
(Enter button) and confirm the setting.Then the display goes back to
<Screen50-2>.
(4) At <Screen50-2>, select the right most item, [200] in the sample screen, and press
(Enter button). Then the LCD display shows <Screen50-2.4>.
At this screen, press
resolution. Following parameters can be specified.
200:
Scan at 200 dpi
240:
Scan at 240 dpi
300:
Scan at 300 dpi
400:
Scan at 400 dpi
Press
(Enter button) and confirm the setting.Then the display goes back to
<Screen50-2>.
(5) Press
(Enter button). Then the display goes back to <Screen50-1>.
At <Screen50-1>, select [START], and press
<Screen50-2.3>
R
e
a
d
C
(Left arrow button) or
<Screen50-2.4>
R
E
S
O
(Left arrow button) or
n
g
M
o
d
i
O
L
O
R
(Right arrow button) and select
U
T
I
O
N
L
2
0
0
(Right arrow button) and select scan
(Start button).
7.5 Test Mode Details
7
e
221
Advertisement
Table of Contents
