Fujitsu IMAGE SCANNER FI-4860C Operator's Manual page 224

21. Setting SCSI bus width
1) Press (Next button) or
2) At <Screen21>. If Wide SCSI (68pin) interface is used, press
and select [16].
If SCSI-2 (50pin) interface is used, press
HINT
(3) Press (Enter button) and make the setting valid.
Press (EXIT button) at the end and the LCD display goes back to [Ready]
screen.
ATTENTION
(Previous button) and let LCD display <Screen21>.
<Screen21>
! 2 1 S C
= W i d t
The blinking item is the one selected.
- If 16 bit bus width data transfer is prohibited,
specify [8] bit.
S I B u s
h 8 / 1 6
(Right arrow button)
(Left arrow button) and select [8].
7.3 Setup Mode Details
b i t
7
201