Basic Specifications - Fujitsu fi-60F Operator's Manual

4.1 Basic Specifications

1 Scanner Type
2 Image sensor
3 Light source
4 Scanning
area
5 Scanning
Speed
(Note (*1))
6 Optical Resolution
7 Output reso-
lution
8 Grayscale level
(internal)
9 Halftone Patterns
10 Interface
(Note (*2))
*1) The scanning speed is the maximum speed of the scanner hardware. Software pro-
*2) If you connect the scanner with USB 2.0, it is required that the USB port and the
38
Flatbed
Color Contact Image Sensor
(CMOS IC)
Three LEDs (RGB)
Maximum 148 x105mm
5.8 in X 4.13 in
Binary 1.0 sec
(monochrome)
Color 1.3 sec
600 dpi
Binary 50 - 600 dpi
(monochrome)
Grayscale 50 - 600 dpi
Color 50 - 600 dpi
8 bits per color
Dither / error diffusion
USB 2.0 / 1.1
cessing time such as data transfer time is added to the actual scanning time.
Hub are compliant with USB 2.0. The scanning speed may slow down when you
connect the scanner with USB 1.1. If your computer has the compatible USB 2.0
port, please use it.
-
A6
-
200 dpi, max size
USB 2.0
150 dpi max size
USB 2.0
-
Scalable in 1 dpi incre-
ments
Scalable in 1 dpi incre-
ments
Scalable in 1 dpi incre-
ments
Internal 16 bits
-
B type