Test Mode; Test Mode Overview - Fujitsu IMAGE SCANNER FI-4860C Operator's Manual

7.4 Test Mode Overview

■ Outline
Scanner operation can be checked in offline test mode.
To enter the test mode, follow the procedures below.

- Test mode

Keep pressing
Then the operator panel LCD displays the following message.
Press (Left arrow button) or
By pressing
To end the test mode, turn off the power.
HINT
(Start button) and turn on the power.
< M O
S E
(Right arrow button) and select [Reset].
(Enter button), the scanner enters test mode.
The blinking item is the one selected.
D E S E L E
T U T
P E
7.4 Test Mode Overview
C T >
S T
213
7