Fujitsu IMAGE SCANNER FI-4860C Operator's Manual page 209

4) In <Screen9-1> to <Screen9-5>, to reset the corresponding counter, press
arrow button) and select [Reset].
Press (Enter button) to confirm the selection, then <Screen9-6> is displayed.
If you do not want to reset the counter, select [No] and press
HINT
5) If reset is really OK, select [YES] and press
To cancel Reset, select [No] and press
Press (EXIT button) at <Screen9-1>, <Screen9-2>, <Screen9-3>, <Screen9-4>
or <Screen9-5>, the LCD display changes to <Screen9>.
Press (EXIT button) at <Screen9> and the LCD display goes back to [Ready]
screen.
186
7.3 Setup Mode Details
<Screen9-6>
! 0 9 - 6
x x x x
[XXXXXX] is the counter value of the selected
consumable.
- Pick roller counter
- Brake roller counter
- Pad counter
- Front-side lamp counter (lamp-on time)
- Back-side lamp counter (lamp-on time)
(Enter button).
(Enter button).
R e s e t N
N e
o / Y
(Enter button).
(Left
o w
s