Fujitsu IMAGE SCANNER FI-4860C Operator's Manual page 220

18. Setting Manual Feed mode
1) Press (Next button) or
2) At <Screen18>, if the setting change is required, press
select [Yes].
HINT
Press (Enter button) to confirm the selection then the LCD display changes to
<Screen18-1>.
If the change is not necessary, select [No] and press
3) At <Screen18-1>, specify the time to start pick from the manual setting of the
document (Start time).
By pressing (Left arrow button), the pick start time decreases.
By pressing (Right arrow button), the pick start time increases.
The pick start time can be specified to be 0.2 to 29.8 seconds.
HINT
(Previous button) and let LCD display <Screen18>.
<Screen18>
M
! 1 8 a
h g
C a n
The blinking item is the one selected.
<Screen18-1>
! 1 8 - 1
=
Pick start time can be specified by the unit of 0.2
second.
n u a l F e
N /
e ? o Y
(Right arrow button) and
(Enter button).
P i c k S t
1 . 0 S e c
7.3 Setup Mode Details
e d
e s
7
a r t
197