Setup Mode - Fujitsu IMAGE SCANNER FI-4860C Operator's Manual

7.1 Setup Mode

■ Outline
There are two types of setup mode: Online setup mode that can be entered during scanner
"Ready" status, and Offline setup mode that can be entered only when the scanner is offline.
Available functions differ with the two modes.
To enter these mode, follow the instructions below:
- Online setup mode
When LCD indicates Ready status, press
The following message appears.
By pressing
- Offline setup mode and Online setup mode
Keep pressing
Then the operator panel LCD displays the following message.
Press (Left arrow button) or
Press (Enter button) to enter Offline setup mode.
To quit setup, press
HINT
154
7.1 Setup Mode
M o d
! S e
(Enter button), the scanner enters Offline setup mode.
(Start button) and turn on the power.
< M O
S E
(Right arrow button) and select [Setup].
(EXIT button).
The blinking item is the one selected.
(Next button).
S e l
e e c
t u p M o d
D E S E L E
T U
P T E
1
t
e
C T >
S T